Wind Blade Trailer For Wind Turbine Blades Transportation Semi-Trailer
1. Max rotation angle of the rotor blade 360°
2. Max rotation angle of the platform 360°
3. Angle of inclination up to 60°
4. Radio remote control with display of wind speed, transverse gradient, blade position, ballast position
5. Girder brand wind blade adapter can combine with modular semi trailer and heavy duty low bed trailer.
6. The height of trailer platform can be 500mm to 1000mm
7. Self-balancing counterweight ensure the transport stability and safety
8. The suitable speed
2. Max rotation angle of the platform 360°
3. Angle of inclination up to 60°
4. Radio remote control with display of wind speed, transverse gradient, blade position, ballast position
5. Girder brand wind blade adapter can combine with modular semi trailer and heavy duty low bed trailer.
6. The height of trailer platform can be 500mm to 1000mm
7. Self-balancing counterweight ensure the transport stability and safety
8. The suitable speed
Wind Blade Trailer For Wind Turbine Blades Transportation Semi-Trailer
Blade lift-rotation-hydraulic steering special blade transporters (referred to as lifting vehicles) are specially designed for complex road transportation of wind power blades. Because the blades can be lifted by hydraulic control on the way, and the 360-degree rotation itself can avoid various constraints during transportation (mountain slopes, trees, houses, Bridges, tunnels, etc.). It can reduce the blade sweep area, greatly reduce the amount of road reconstruction works, shorten the road reconstruction period, to a certain extent, meet the insufficient turning radius, avoid obstacles such as mountains and cliffs, buildings, electric poles and house demolition, and can also greatly reduce the total length of the blade transport vehicle body
Specific of windmill transport semi trailer:
|
Dimension
|
14000mm×3200mm×4460mm (Outside)
|
|
Tooling Dimension
|
10314mmx3200mmx3390mm
|
|
Tare weight
|
About 35Tons
|
|
Tooling Weight
|
29Tons
|
|
Lifting cylinder
|
Cylinder diameter280mm Lift angle 0-55
|
|
Gooseneck with an active platform
|
1m
|
|
Hydraulic Station
|
31KW Four-cylinder diesel engine
|
|
Axle
|
3 line 6 axles, Yuek brand or hydraulic modular trailer
|
|
Landing Gear
|
Front and rear Hydraulic support cylinder
|
|
King Pin
|
2.00 or 3.5 inch bolt-in king pin
|
|
Platform weight
|
15Tons
|
|
Tire
|
9.00R20*24Pcs
|
